US Demand for Membranes to Approach $5.4 Billion in 2016

April 13, 2012

Demand for membranes in the United States is expected to increase 7.7 percent per year to $5.4 billion in 2016, according to Membrane Separation Technologies, a new study from The

Demand for membranes in the United States is expected to increase 7.7 percent per year to $5.4 billion in 2016, according to Membrane Separation Technologies, a new study from The Freedonia Group. Growth will be driven by the need to comply with environmental regulations regarding water and wastewater streams. These regulations often require purity levels that are best achieved using membranes, Freedonia says.

As manufacturing activity and investment in industrial equipment continues to improve, the Freedonia report predicts companies will increasingly purchase membrane separation systems either to replace conventional separation systems or to fill new fluid separation needs. Water and wastewater treatment will continue to be the largest market for membranes in 2016, representing nearly half of sales.

Freedonia says polymeric membrane materials will continue to dominate the market because of their relatively low initial costs and their suitability for use in a range of applications. Fluoropolymers and polyamides each accounted for approximately 30 percent of the polymeric market in 2011. Demand for nonpolymeric materials, including ceramics, metals, and composites, will increase due to factors such as better performance in extreme temperatures and greater pH ranges, as well as generally lower maintenance costs, Freedonia says.?

Microfiltration membranes, which represent the most established and mature type of membranes, are projected to continue to account for the largest share of total demand for the foreseeable future, the report says. However, more rapid advances are projected for reverse-osmosis and ultrafiltration membranes, both of which produce higher-purity streams. These two membrane types will also benefit from their ability to sufficiently treat wastewater for reuse and from growing interest in producing potable water from brackish water and seawater, Freedonia says. Among the major types, gains are expected to be fastest for pervaporation membranes, although from a small base. Ongoing development of pervaporation membranes will contribute to their increasing penetration of high-growth specialty markets such as chemical processing and pharmaceutical manufacturing, as well as fluid treatment in wastewater and industrial gas processing, the report concludes.

Sponsored Recommendations

Learn About: Micro Motion™ 4700 Config I/O Coriolis Transmitter

An Advanced Transmitter that Expands Connectivity

Micro Motion™ G-Series Compact, Drainable Coriolis Flow and Density Meters

Micro Motion G-Series Coriolis flow and density meters are ideally suited for Process Monitoring and Optimization applications, offering easy selection with pre-selected models...

Learn about: Micro Motion G-Series Coriolis Flow and Density Meters

The Micro Motion G-Series is designed to help you access the benefits of Coriolis technology even when available space is limited.

Micro Motion 4700 Coriolis Configurable Inputs and Outputs Transmitter

The Micro Motion 4700 Coriolis Transmitter offers a compact C1D1 (Zone 1) housing. Bluetooth and Smart Meter Verification are available.